another please help question

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Page
Posts: 44
Joined: Thu Mar 07, 2013 12:06 pm
ECU Model: S60 Pro
Distributor: Local Dealer GR
Firmware Version: 62

another please help question

Post by Page »

Hi guys,

Is anyone using TPS of magneti marelli pF1c/00 ?

Yesterday start the engine for First time. All went good except TPS stops.
On close position is on red area reading 2.500mv.
Pressing OK button a message comes up and says must be lower than 400mv .

This type of TPS comes with throttle body.

Geo.

(s60 pro)
stevieturbo
Posts: 3588
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: another please help question

Post by stevieturbo »

Is it wired correctly ?

And is there any manual adjustment of the sensor ?
Page
Posts: 44
Joined: Thu Mar 07, 2013 12:06 pm
ECU Model: S60 Pro
Distributor: Local Dealer GR
Firmware Version: 62

Re: another please help question

Post by Page »

stevieturbo wrote:Is it wired correctly ?

And is there any manual adjustment of the sensor ?
thanks stevieturbo,
You're totally right .
The classic error of gnd and signal mixed up !

I'm so dumb ! :lol: :lol: :lol:

* No there is not a manual adj.

But since opened a new topic, from my stupidity,
eventually this TPS sensor works properly and very well.
Post Reply