Page 4 of 6
Re: S Dash
Posted: Wed Nov 07, 2012 3:48 pm
by Roverdose
Thank you Marco. now works perfectly
cheers
Drew
Re: S Dash
Posted: Thu Dec 13, 2012 1:11 pm
by Audi_CQ
MarcoV6T wrote:
But I see that you still have the old firmware, for the advanced stream(old dyno stream), you’ll need to upgrade to the newer firmware(to make it work with the later DTA firmware).
Hi Marco
Are the newer firmware available for download somewhere or only distribution by mail?
Cheers,
Roger
Re: S Dash
Posted: Fri Dec 14, 2012 10:49 am
by MarcoV6T
Hi Roger,
I just checked, you have version 1(8 led's) of the display, I'll send you the firmware.
Cheers,
Marco.
Re: S Dash
Posted: Tue Dec 25, 2012 3:34 am
by corsaboy
Marco,
i've a problem with my dash, it looks that the screen is broken, i have a line complete fallen out.
Another question, do you have newer firmware for the logging?
It works but you Always need to activate it manual, i hope the function log with engine start would work in the newer firmware?
thx mate
Re: S Dash
Posted: Mon Mar 18, 2013 4:53 pm
by vtrmassive
Marco,
Long time no speak , purchased my S dash some time ago now , i must say what a piece of kit anyway was just getting to grips with it when i blew the car up. So after a rebuild the year before last and not much use last summer due to moving house etc im back. Any new firmware would be much appreciated and are you still making them as i may have a friend interested
Also what the hell happened to the old site ???????????
Re: S Dash
Posted: Tue Mar 19, 2013 6:04 am
by MarcoV6T
Yes, long time no see.
I’ll send you an update, I’ve your address, but can’t find your email, can you send me a pm with your email?
Thanks for the compliment by the way,
Cheers.
Re: S Dash
Posted: Tue Mar 19, 2013 11:05 am
by vtrmassive
Marco
Received and updated the firmware tar very much,
Would it be possible to add on the next firmware the function of turning closed loop lambda control on and off ???
Also are you still producing the units to buy ?
Re: S Dash
Posted: Tue Mar 19, 2013 7:08 pm
by MarcoV6T
vtrmassive wrote:Would it be possible to add on the next firmware the function of turning closed loop lambda control on and off ???
It’s probably doable, but how would you turn it on/off, via an external button(using one off the 4 inputs), or on the dash via the menu?
vtrmassive wrote:Also are you still producing the units to buy ?
No, don’t have much time for it at the moment, but maybe in the future.
Re: S Dash
Posted: Thu Mar 21, 2013 3:54 pm
by vtrmassive
Thinking on the menu if possible
Re: S Dash
Posted: Wed May 14, 2014 1:29 am
by vtrmassive
Hi everyone , just thought I would try revive the thread , how's everyone getting on with there SDash ?
Marco how are you ? Any thoughts on making some more I know a few who would be interested