TPS

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
paulw
Posts: 79
Joined: Sat Sep 03, 2011 10:08 am

TPS

Post by paulw »

OEM TPS has got 4 wires. Reading from the Suzuki Swift diagram.

1.5v power
2.TPS signal
3.ground
4.Idle switch?

I'm OK with 1. 2. 3. but idle switch what pin should that go to? Or just not connect it?

Paul
Top
Rob Stevens
Posts: 1250
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: TPS

Post by Rob Stevens »

Yeh, don't connect it.
Top
stevieturbo
Posts: 3588
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: TPS

Post by stevieturbo »

Idle switch not needed. Older Subarus used to do that too.
Top
paulw
Posts: 79
Joined: Sat Sep 03, 2011 10:08 am

Re: TPS

Post by paulw »

Rob Stevens wrote:Yeh, don't connect it.
stevieturbo wrote:Idle switch not needed. Older Subarus used to do that too.
cheers fella's i can get a bit further with the loom tomorrow.

Paul
Top
Post Reply

Return to “Sensors, Inputs, and Outputs”