Oh right, cheers...
DTA themselves was my next port of call but according to the cars owner they werent very helpfull when he got in touch with them.
I have a very old ECU...
Re: I have a very old ECU...
i have herd people say that, but i have always got on well with Allan, even if we dont see eye to eye on everything!
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: I have a very old ECU...
Allan has always been very helpful when Ive contacted him.Mikey G wrote:Oh right, cheers...
DTA themselves was my next port of call but according to the cars owner they werent very helpfull when he got in touch with them.
Re: I have a very old ECU...
Helpful or not, he's still unnecessarily rude and arrogant a lot of the time. You shouldn't have to tread on egg shells around a service provider. Us buying his ECUs puts bread on his table and he'd do well to remember that when speaking to his customers.
Re: I have a very old ECU...
Your ECU just needs an upgrade chip fitting even if it was on DOS the new chip will allow it to work on windows ie DTAWin software, ask DTA they are not as bad as some would have you think...
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: I have a very old ECU...
VR6Turbo wrote:Helpful or not, he's still unnecessarily rude and arrogant a lot of the time. You shouldn't have to tread on egg shells around a service provider. Us buying his ECUs puts bread on his table and he'd do well to remember that when speaking to his customers.
PMSL ! very accurate and also very true! He is very clever but not so good at customer relations! However, do give DTA a ring, you may well get some helpful advice from his "technical assistant"
Martin
-
- Posts: 36
- Joined: Sat Jul 21, 2012 12:33 am
- ECU Model: S40 Pro
- Distributor: Mefmotorsport
- Firmware Version: 77
- Location: The Netherlands
- Contact:
Re: I have a very old ECU...
I can supply you dtados if you want?
i don't know the version of it.
i don't know the version of it.
Re: I have a very old ECU...
Not had the chance to revisit this over the last couple of weeks...
Worth a try.
Cheers
I'll PM you my email address if you dont mind sending it over?pro2call wrote:I can supply you dtados if you want?
i don't know the version of it.
Worth a try.
Cheers
-
- Posts: 36
- Joined: Sat Jul 21, 2012 12:33 am
- ECU Model: S40 Pro
- Distributor: Mefmotorsport
- Firmware Version: 77
- Location: The Netherlands
- Contact:
Re: I have a very old ECU...
check your mail....
Re: I have a very old ECU...
Nothing yet, did you send to the address I sent you?
Cheers
Cheers