The data logging feature is grey, and can't be selected.
Can i know how to initiate the data logging function??
Thank you.
Unable to initiate data logging
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Unable to initiate data logging
S40 does not datalog, and I do not believe there is a software logging option.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Unable to initiate data logging
You can save data from the S40 (direct to your pc) when the pc is connected by using the 'real time chart' (in display and test).
only the >S60 have onboard logging.
However the S40 still has a high low recording like rpm and water temp, located in 'Diagnostic display'.
only the >S60 have onboard logging.
However the S40 still has a high low recording like rpm and water temp, located in 'Diagnostic display'.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Unable to initiate data logging
Someone did have some app or something didn't they that you could stream data to ? It was quite a few years ago ?
Can't recall if it was RS232 or CAN based ?
Can't recall if it was RS232 or CAN based ?
Re: Unable to initiate data logging
I see.
Thank you for the replies..
Thank you for the replies..