T2 Twin Injectors
Posted: Sat Aug 06, 2022 2:25 pm
Upgrading from an e48 using twin injectors to a T2 ecu. DTA helpfully transferred my existing map to the new ecu.
On the e48 twin injectors were enabled 'above' set RPM/TPS position. On the T2 I have selected twin injectors in the Injector Settings but don't see similar 'above RPM/TPS' settings. In this forum there are some suggestions re: S series ecu that a blend map might not be needed.
1. Will the T2 ecu automatically determine when to bring in the second injector?
2. If not, do I have to set up a blend map? If that is the case, will the existing main fuel map need to be modified?
Thanks in advance.
On the e48 twin injectors were enabled 'above' set RPM/TPS position. On the T2 I have selected twin injectors in the Injector Settings but don't see similar 'above RPM/TPS' settings. In this forum there are some suggestions re: S series ecu that a blend map might not be needed.
1. Will the T2 ecu automatically determine when to bring in the second injector?
2. If not, do I have to set up a blend map? If that is the case, will the existing main fuel map need to be modified?
Thanks in advance.