Synchronisation Issues Honda CBR600RR 2007

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Ray_01403
Posts: 4
Joined: Mon Jun 06, 2022 3:02 pm
ECU Model: S60 Pro

Synchronisation Issues Honda CBR600RR 2007

Post by Ray_01403 »

I'm trying to start a 2007 Honda CBR600RR engine, I'm using the standard Formula Student Map, attached via Google Drive link.https://drive.google.com/file/d/13WS-OJ ... sp=sharing

Unfortunately, I am having a tough time trying to synchronise the engine and S60 ECU. I have gathered the crankshaft oscilloscope data
Oscillioscope - Crank Data.jpg
and have attempted to synchronise the engine multiple times, but each time it fails to sync.
I have also attached the General Engine settings
General engine settings.jpg
I have tried changing flywheel modes and Teeth count.

Can anyone advise me on what to do? Could the Cam sensor be faulty or the sensor position be wrong?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Synchronisation Issues Honda CBR600RR 2007

Post by Rob Stevens »

Looks like you have good signal, a 3 point cam sensor and 12 tooth crank trigger. It may be you have an odd cam configuration, send that trace to Alex at dta to confirm. I'm not sure you have a cam trigger like the one in the manual on page 6?
Ray_01403
Posts: 4
Joined: Mon Jun 06, 2022 3:02 pm
ECU Model: S60 Pro

Re: Synchronisation Issues Honda CBR600RR 2007

Post by Ray_01403 »

I've sent them to Alex and he's come back to me saying that the settings are correct, but synchronisation still isn't happening so I was wondering if anyone else would have some ideas as to why it wouldn't synchronise.
It just seems weird that although everything is reading correctly it just isn't able to sync.
Ray_01403
Posts: 4
Joined: Mon Jun 06, 2022 3:02 pm
ECU Model: S60 Pro

Re: Synchronisation Issues Honda CBR600RR 2007

Post by Ray_01403 »

Also what manual are you referring to?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Synchronisation Issues Honda CBR600RR 2007

Post by Rob Stevens »

The s60 wiring diagram
Ray_01403
Posts: 4
Joined: Mon Jun 06, 2022 3:02 pm
ECU Model: S60 Pro

Re: Synchronisation Issues Honda CBR600RR 2007

Post by Ray_01403 »

Thanks I'll have a look!
Post Reply