S Series CAN .DBC files
Posted: Mon Dec 13, 2021 10:00 am
I don't suppose there is a later S80 Series ecu Can Bus .DBC file than the v79.04 download on the web site, is there?
I could really do with accessing the v86.04 switches stream. The DBC file would be a great timesaver.
I'm using the S80 with an AiM MXP dash, I had started writing a custom AiM driver, and am fine with the data up to the switches point, which are all 16 bits, across 2 bytes, across each data packet.
For the switches, on the 0x2007 packet, I'm assuming each switch is one bit, across the two bytes, hence 16 bits altogether, with only the first 6 bits used?
Bit Function
0 Launch button pressed
1 Launch active
2 Traction On
3 Traction Wet
4 Fuel pump On
5 Fan On
Thus:
https://photos.app.goo.gl/XRPCkSxgGNQki31NA
I could really do with accessing the v86.04 switches stream. The DBC file would be a great timesaver.
I'm using the S80 with an AiM MXP dash, I had started writing a custom AiM driver, and am fine with the data up to the switches point, which are all 16 bits, across 2 bytes, across each data packet.
For the switches, on the 0x2007 packet, I'm assuming each switch is one bit, across the two bytes, hence 16 bits altogether, with only the first 6 bits used?
Bit Function
0 Launch button pressed
1 Launch active
2 Traction On
3 Traction Wet
4 Fuel pump On
5 Fan On
Thus:
https://photos.app.goo.gl/XRPCkSxgGNQki31NA