Anyone have any x16xe maps?
Standard engine running throttle bodies
Thanks in advance.
Nick
X16xe map
Re: X16xe map
My email address is nickduncan2212@gmail.com if it makes it easier to send.
Thanks again
Thanks again
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: X16xe map
Just use the zetec map with appropriate crank sensor adjustments?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: X16xe map
There should be a 2L XE map with the software, which will have the correct crank angle.
Fuelling shouldn't be too far off either as yours will have smaller injectors.
Fuelling shouldn't be too far off either as yours will have smaller injectors.
Re: X16xe map
I have 330cc injectors and I think c20xe use 220cc so mine are a little bigger.
I was hoping I would get lucky and get a decent map for a x16xe as I could use it for a base for my z18xe to build from as the x16xe is a lot more commonly used.
I was hoping I would get lucky and get a decent map for a x16xe as I could use it for a base for my z18xe to build from as the x16xe is a lot more commonly used.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: X16xe map
I don't have any known good X16XE maps, but I do have a random one at the office.
Email office@dtafast.co.uk if you'd like a copy
Email office@dtafast.co.uk if you'd like a copy