DTAForum.com - a forum for the DTA ECU

Hi all just a quick one
In comp Baro settings it in % for timing For eg in my main ing table if i have 30 degrees on full load at 27 psi and at 27 psi in baro it says -3 is that - 3% of 30 degrees at 27 psi so 27 degrees advance?
Thanks

Depends on how you have this set. you can either remove (or add) a % or a figure as in this example. if you want to remove 3 deg at 27 psi type -3 in that row.
In your example you will be removing 3% , just 0.9 degrees