what are the benefits in upgrading to the latest s100 firmware? How to I go about uploading the new firmware to the s100 unit?
Ralph
S100 latest firmare
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S100 latest firmare
Depends on what your current firmware is.
Guide here:
https://www.dtafast.co.uk/download_file ... TA%20S.pdf
Guide here:
https://www.dtafast.co.uk/download_file ... TA%20S.pdf
Re: S100 latest firmare
Thanks Alex, I will check
Re: S100 latest firmare
Hi Alex, This is what was displayed, the current firmware is as follows:
DTA Swin V82.16 - ECU:- S100V62.01 COMS: - RS232
What do you think, should we update?
Ralph
DTA Swin V82.16 - ECU:- S100V62.01 COMS: - RS232
What do you think, should we update?
Ralph
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S100 latest firmare
There are a lot of updates since then, but I would only bother if there's some functionality you need.
Re: S100 latest firmare
we want to run our bmws65 race car engine in closed loop, currently running in open loop with one wideband sensor.
Re: S100 latest firmare
Hi Alex, we also want to run two wideband sensors and have the data sent to our race technology pod dash. Can the updated firmware capture both sensors data and send to the dash using the Can stream?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S100 latest firmare
Yesbmwe36m3 wrote:Hi Alex, we also want to run two wideband sensors and have the data sent to our race technology pod dash. Can the updated firmware capture both sensors data and send to the dash using the Can stream?
Re: S100 latest firmare
Thanks Alex,
can you provide the data for us to complete the screen to run closed loop in our bmw s65 engine when we add the 2nd wide band sensor. We plan to order the Innovate DLG-1 system unless you have a better suggestion to work with the S100
can you provide the data for us to complete the screen to run closed loop in our bmw s65 engine when we add the 2nd wide band sensor. We plan to order the Innovate DLG-1 system unless you have a better suggestion to work with the S100
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S100 latest firmare
I'll need a bit of information to set that up, so best email me. office@dtafast.co.ukbmwe36m3 wrote:Thanks Alex,
can you provide the data for us to complete the screen to run closed loop in our bmw s65 engine when we add the 2nd wide band sensor. We plan to order the Innovate DLG-1 system unless you have a better suggestion to work with the S100