Morning guys.
I'm hoping someone could help with some voltage range for the picture sensor. It came on a oil heat exchanger (I was told off the cosworth indy car engine) but unsure.
Any help would be much appreciated. I'm hoping I don't have to get a heat gun, temp gauge and voltage meter to come up with rights temps.
Thanks
Chris
Help Identifying Temp Sensor
Help Identifying Temp Sensor
- Attachments
-
- tempsensor.jpg (22.57 KiB) Viewed 5086 times
Re: Help Identifying Temp Sensor
It could be anything! Even if it looks the same could have different resistances!
'Fraid your gonna have to get a DVM and use the ice water and boiling water test
to determine the slope!
'Fraid your gonna have to get a DVM and use the ice water and boiling water test
to determine the slope!
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Help Identifying Temp Sensor
For sake of £15 or so, be easier just to buy one with a known scale. Although it would likely be close to a Bosch NTC scale anyway
No part numbers on it ?
No part numbers on it ?
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Help Identifying Temp Sensor
For the 30 odd bucks it'll cost I'd buy a Bosch one - cheap in the long run, and likely same thread.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Re: Help Identifying Temp Sensor
Thanks. Standard Bosch sensor in the mail...