E48 problems

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Arran rs
Posts: 1
Joined: Thu Jan 03, 2013 5:57 pm
ECU Model: No ECU
Firmware Version: 53

E48 problems

Post by Arran rs »

Hi, I'm trying to get my escort running with jenvey bodies and dta e48 ecu, things seem to be ok, fuel pump is operating correctly and getting spark, the problem is the injectors are open all the time! I thought the ecu should switch the earth once every engine revolution! I have not tried to start the car yet as I'm sure this is not right! Can anyone offer some advice or thoughts on this please! Thanks!
Top
JON-TEC-RALLYE
Posts: 38
Joined: Sat Jul 30, 2011 4:35 pm
ECU Model: S100 Pro
Distributor: JON-TEC-RALLYE
Firmware Version: 89
Location: Canary-Island

Re: E48 problems

Post by JON-TEC-RALLYE »

Hi, If the injectors are open all the time continuously, it is possible that this faulty dta.

I had the same problem with dta p8 while. was repaired and no more problem.
DTA--MoTec--Link--Ecumaster--HONDATA
Top
Post Reply

Return to “General”