Hi,
When I try and edit the "Air temp compensation" on my E48 ecu I get this error
Error - Air temperatures must increase row by row
I dont know why it does it when I make one change or 10 changes, any ideas?
Thanks
Error - Air temperatures must increase row by row
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Error - Air temperatures must increase row by row
do your temps increase row by row, if they don't that sounds like you are trying to do that the ecu finds confusing.
Try setting corrections to standard, make sure the temps increase line by line and that you dont have 2 temp entries the same.
Try setting corrections to standard, make sure the temps increase line by line and that you dont have 2 temp entries the same.
-
- Posts: 15
- Joined: Fri Nov 30, 2012 3:40 pm
- ECU Model: No ECU
- Distributor: DTA
- Firmware Version: 53
Re: Error - Air temperatures must increase row by row
Thanks, here is a screen shot to help
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: Error - Air temperatures must increase row by row
the last 5 rows are all 120dgr. how about starting at 0 and increasing each row by 5.
Drew
Drew
-
- Posts: 15
- Joined: Fri Nov 30, 2012 3:40 pm
- ECU Model: No ECU
- Distributor: DTA
- Firmware Version: 53
Re: Error - Air temperatures must increase row by row
Thanks I changed the 120's and that allowed me to save it.
The strange thing is the standard vw 1800 map that comes with the software is set similar.
The strange thing is the standard vw 1800 map that comes with the software is set similar.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Error - Air temperatures must increase row by row
Some base maps do have odd values in them, but it only flags an error when you try to make changes.
You need to work from low values up and they must increase from low to high, no duplicate values allowed.
You need to work from low values up and they must increase from low to high, no duplicate values allowed.
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Error - Air temperatures must increase row by row
Mucka - you have to realize some of the maps were created back on different versions of DTASWin. So they load, because they are just text files, but the macro that checks to see that things are filled in correctly will run when you alter the table, and then it complains.
1992 700RWHP Pump Gas BMW