Double gap error
-
swsupermoto
- Posts: 82
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Double gap error
Got a sync error on a Ktm 1290;engine running t8+ The gather shows a single then double tooth gap. I think it due to the fact it on one of the pistons tdc. I got an offset of 285 and it’s a 75 degree v. Any ideas it’s due on the rollers Monday. Thanks
-
Rob Stevens
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Double gap error
Did you sort this out ok?
v twins can be weird, what is the crank trigger as in how many teeth and gaps?
I just had a Suzuki V twin apart and the cylinders may be 75 deg apart but the rods don't share the same pin so it doesnt fire 75 deg apart
v twins can be weird, what is the crank trigger as in how many teeth and gaps?
I just had a Suzuki V twin apart and the cylinders may be 75 deg apart but the rods don't share the same pin so it doesnt fire 75 deg apart