data logging issues

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
ben240z
Posts: 15
Joined: Mon Apr 10, 2017 1:19 pm
ECU Model: S80 Pro

data logging issues

Post by ben240z »

Using an s80 ecu and using megalog viewer for analysis and am having issues with the readings.

I have set the throttle stops and saved map

I am recording Throttle position, rpm, fuel pressure, lambda, air and water temp.

The issue I am getting is that I know I have been using more that 40% throttle and more than 3500rpm but the log is only recording those figures.
The lambda is logging at around 0.85 and the temps are recording as the gauges are reading.

I have checked the throttle stops and they are still as saved

Why would the tps and rpm be so inaccurately logged? Is it something i am doing in megalog?

Please answer in terminology the village idiot can understand

Thanks Ben
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: data logging issues

Post by stevieturbo »

email/upload the log. It will not be recording incorrect
ben240z
Posts: 15
Joined: Mon Apr 10, 2017 1:19 pm
ECU Model: S80 Pro

Re: data logging issues

Post by ben240z »

Hi Steve, emailed the log files to you. Sorry for the delay.

Really appreciate you looking at them

Cheers Ben
Post Reply