turbo speed sensor
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: turbo speed sensor
Yes. Create a row in the data table for the digital input you're using, and add the conversion factor in to the Gain field.
Re: turbo speed sensor
Hi Alex,
Sorry to bump an old thread, but seemed appropriate:
If I'd like to use one of the wheelspeed inputs for logging a turbo rpm sensor with 0-5V square wave, what's the maximum allowed input frequency?
ECU is S100, sensor is widely used on Garrett and Borgwarner turbo's (Jaquet).
At 120.000rpm turbo speed, 14 blades and 8:1 divider in the sensor, that's a 3500Hz signal. Will that work OK?
thanks!
Sorry to bump an old thread, but seemed appropriate:
If I'd like to use one of the wheelspeed inputs for logging a turbo rpm sensor with 0-5V square wave, what's the maximum allowed input frequency?
ECU is S100, sensor is widely used on Garrett and Borgwarner turbo's (Jaquet).
At 120.000rpm turbo speed, 14 blades and 8:1 divider in the sensor, that's a 3500Hz signal. Will that work OK?
thanks!
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: turbo speed sensor
Yes, that will be fine.