S40 idle control valve
-
- Posts: 9
- Joined: Sat Oct 30, 2021 9:20 am
- ECU Model: S40 Pro
Re: S40 idle control valve
Yes I moved all injectors to output 1 and wires the idle to pin 9, I ha e now put it back to what it originally was but now th car won't start atall
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S40 idle control valve
Clearly something else is wrong then!
-
- Posts: 9
- Joined: Sat Oct 30, 2021 9:20 am
- ECU Model: S40 Pro
Re: S40 idle control valve
Blown something in the ecu knowing my luck, I've done that before with the coil drivers
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S40 idle control valve
Yes, but are you getting fuel injected ? are you getting a spark ?slam-jam@live.co.uk wrote: ↑Sat Nov 27, 2021 5:07 am Yes I moved all injectors to output 1 and wires the idle to pin 9, I ha e now put it back to what it originally was but now th car won't start atall
Confirm before making assumptions. You could maybe just have drowned the plugs or something. Have you configured the ecu correctly ? Does the ecu seem to be alive ok ?
-
- Posts: 9
- Joined: Sat Oct 30, 2021 9:20 am
- ECU Model: S40 Pro
Re: S40 idle control valve
Yes got fuel and spark, it splutters as if its going to start but won't, ecu seems to be ok
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S40 idle control valve
Well if you have fuel and spark and comms with the ecu....it would be unlikely you have blown the ecu
And again, have you drowned the plugs ? Replace them.
And again, have you drowned the plugs ? Replace them.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S40 idle control valve
Has this engine ever run correctly?
If not I suggest you don't get hung up on the idle valve just yet.
If not I suggest you don't get hung up on the idle valve just yet.
-
- Posts: 9
- Joined: Sat Oct 30, 2021 9:20 am
- ECU Model: S40 Pro
Re: S40 idle control valve
In engine diagnostics what should my coil driver count/deg c be?