Hi
Can anybody help please i have a E48 on a fiat twin cam 2ltr with 40s jenvey throttle bodies on essential engine settings what should i put in for these
1/injector dead time
2/the offset
3/switch injector
I have done all others and set timing
Hope someone can help
Cheers Dave
E48
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: E48
1/injector dead time 0.7 will do unless you have data on your injectors
2/the offset 0.0 only applicable if you have twin spark plugs
3/switch injector NA , only applicable if you are using 2 injectors per cylinder, make sure you have 1 injector selected
Rob
2/the offset 0.0 only applicable if you have twin spark plugs
3/switch injector NA , only applicable if you are using 2 injectors per cylinder, make sure you have 1 injector selected
Rob
-
- Posts: 9
- Joined: Sat Mar 14, 2020 7:07 am
- ECU Model: P8 Pro
- Distributor: dta
- Firmware Version: 73.01
Re: E48
Hi
Is there a base map (Fuel/Ignition)i can load into ECU just to run engine before goes to rolling road
I have a map in ecu at present but no idea if right.I have the map on laptop so can take photos of maps and send by whats app if anybody got the time
My Mobile 07473953979
Is there a base map (Fuel/Ignition)i can load into ECU just to run engine before goes to rolling road
I have a map in ecu at present but no idea if right.I have the map on laptop so can take photos of maps and send by whats app if anybody got the time
My Mobile 07473953979
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: E48
Hi
The 1800 VW map that is in the software should be a good start, just make sure you get the crank trigger type correct and the position BTDC right as you can
The 1800 VW map that is in the software should be a good start, just make sure you get the crank trigger type correct and the position BTDC right as you can
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: E48
it is already in the DTAwin software that you must be using to connect to the ecu. Try it off line File>Open>1800VW>Open
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: E48
Nice one
Re: E48
hi all,
just about to buy a 1.4 k series which is running the e48 ecu, once fitted in to my new car i thought be worth checking on the rollers encase different exhausts ect make it run leaner/richer but I'm struggling to find someone in the south that has the patients to set up the e48...
can anyone suggest a garage that doesn't mind setting the car up with this ecu?
just about to buy a 1.4 k series which is running the e48 ecu, once fitted in to my new car i thought be worth checking on the rollers encase different exhausts ect make it run leaner/richer but I'm struggling to find someone in the south that has the patients to set up the e48...
can anyone suggest a garage that doesn't mind setting the car up with this ecu?