Hi,
I'm preparing to make up a loom to run a gen 2 'busa with and S100.
I've identified and sourced all of the connectors I need apart from the standard Suzuki water temperature sensor.
Can anyone help with a make and part number?
Gen 2 'Busa water temperature sensor connector?
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Gen 2 'Busa water temperature sensor connector?
TBH you may find it simpler to change to a Bosch sensor with a standard Mini Timer connector, helps with the calibration also, it's the same thread, well on my gen1 it is. Do the oil temp & pressure while you are at it.
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Gen 2 'Busa water temperature sensor connector?
A picture of said sensor and a connector would help.
Or as said, just change it.
Or as said, just change it.
-
- Posts: 137
- Joined: Tue Jan 16, 2018 9:38 am
- ECU Model: S100 Pro
- Distributor: DTA
- Location: Aberdeen
Re: Gen 2 'Busa water temperature sensor connector?
try Kojaykat online.
-
- Posts: 21
- Joined: Thu Dec 14, 2017 4:40 pm
- ECU Model: S100 Pro
- Distributor: DTA UK
- Firmware Version: 79
- Location: France
Re: Gen 2 'Busa water temperature sensor connector?
Postage will be more than the connector.
Air and water are the same, just the color is different.
Available from different sources, 1 example:
https://www.ebay.com/itm/282998022765
Air and water are the same, just the color is different.
Available from different sources, 1 example:
https://www.ebay.com/itm/282998022765
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
Re: Gen 2 'Busa water temperature sensor connector?
Thanks for the replies
Rob,
Yes, I may well swap the sensors and use mini Timer connectors (and save the bother of working out the appropriate calibration for the stock Suzuki sensors.
INDYabusa, No. Gen 2 are not the same connector for water and air temperatures, and not as the one in your link.
SMR,
I've now identified the connector at Kojaycat:-
https://kojaycat.co.uk/epages/950000457 ... C-2W-B-Key
Sadly, as I was planning on ordering multiple other connectors, Kojaycat now report that they will not be dispatching orders until 1st Feb at the earliest
Rob,
Yes, I may well swap the sensors and use mini Timer connectors (and save the bother of working out the appropriate calibration for the stock Suzuki sensors.
INDYabusa, No. Gen 2 are not the same connector for water and air temperatures, and not as the one in your link.
SMR,
I've now identified the connector at Kojaycat:-
https://kojaycat.co.uk/epages/950000457 ... C-2W-B-Key
Sadly, as I was planning on ordering multiple other connectors, Kojaycat now report that they will not be dispatching orders until 1st Feb at the earliest
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Gen 2 'Busa water temperature sensor connector?
I'm using a Volvo sensor with a Hayabusa ecu and dash, and the temperature sensor reads fine. I'd say the Busa one is just a regular Bosch NTC resistance scaling that is very common.
SO in that sense it would be easy, but it's probably easier just to swap the sensor for an easy connector.
SO in that sense it would be easy, but it's probably easier just to swap the sensor for an easy connector.