Is there a diagram available how the 9 pin connector is connected to the 15 pin connector?
My supplier does not have the cable in stock and can not deliver it before monday.
I have installed a S80 on a BMW Z3M and want to start testing.
I just found put that a standard 9 pin serial cable does not fit in the ECU.
Thanks in advance!
Serail cable connection
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Serail cable connection
It's in the diagrams, but for simple use its pins 1 to 5 straight through.
Re: Serail cable connection
I could not find it in the diagrams.
But massieve thanks for the quick reaction!
But massieve thanks for the quick reaction!
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Serail cable connection
It is in there, but here is an older one.
This one does not include the flash switch info as it's very old
http://www.quantums.info/injection.htm#cables
This one does not include the flash switch info as it's very old
http://www.quantums.info/injection.htm#cables
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Serail cable connection
Somewhere on this forum you will find instructions on how to construct the knobs box which I find a great asset
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Serail cable connection
Like in my post above lolRob Stevens wrote:Somewhere on this forum you will find instructions on how to construct the knobs box which I find a great asset
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)