TDC is roughly 11 teeth after the cam signal, so 11 x 12 = 132 is your starting crank sensor angle.
Change to mode 6, enter 12 as number of teeth, and 0 for missing.
There is no way to lock the timing on the S Series. Just take a copy of your map and then set the entire timing table to a fixed value.
SR20DE trigger
Re: SR20DE trigger
brilliant many thanks alex ill give that a go this evening
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: SR20DE trigger
What am I thinking?
It's 11 x 30, not 11 x 12...
Apologies.
It's 11 x 30, not 11 x 12...
Apologies.