I have 8 injectors on my gsxr1000 4 cylinder motorcycle 2 injectors per cylinder and both as of now wrk in batch and spray fuel all the same time.
Cylinder 1 & 4 fires together and 2 & 3 fires together, how do or can i wire it so cylinder 1 and 4 and 2 & 3 Injectors at the bottom only work to about 5500rpm then above that rpm the top injectors cut on while the bottom still runs... thanks
S60 4cylinder wiring
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60 4cylinder wiring
Stage them, primaries then secondaries.
-
- Posts: 46
- Joined: Wed Feb 14, 2018 8:05 am
- ECU Model: S60 Pro
- Distributor: creative custom racing Frank
- Firmware Version: 79.06
Re: S60 4cylinder wiring
And how may I do that which wire has to be connected to what?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S60 4cylinder wiring
Pin 9 - Inj 1 and 4 primary
Pin 17 - Inj 2 and 3 primary
Pin 34 - Inj 1 and 4 secondary
Pin 25 - Inj 2 and 3 secondary
Pin 17 - Inj 2 and 3 primary
Pin 34 - Inj 1 and 4 secondary
Pin 25 - Inj 2 and 3 secondary