vw notchback

Document your project with images, pictures, etc., and share with others.

vw notchback

Postby dannyboy » Sat Nov 12, 2016 2:11 pm

the latest car to be powered by a vw motor and dta ecu
1968 vw variant tube chassis drag car nill be tested next year with the nitrous motor out of the bug using a s40 pro then over next winter the 2720cc methanol turbo vw motor will be run using a s80 ...lots of fun and expense awaits :lol:
Attachments
notch.jpg
Last edited by dannyboy on Sun Mar 12, 2017 2:33 pm, edited 1 time in total.
dannyboy
 
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: vw variant

Postby Alex DTA » Sat Nov 12, 2016 3:36 pm

That's awesome.
I spy a GAC logo in the picture. :)
Alex DTA
 
Posts: 1460
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: vw variant

Postby dannyboy » Sat Nov 12, 2016 4:56 pm

you can also see a dta logo ;) 8-)
dannyboy
 
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: vw variant

Postby DTA Gareth » Tue Nov 15, 2016 4:43 am

would you like some more stickers? :lol:

I very much look forward to seeing that run, it just looks mad.

by why the original flat 4? is it a class regulation of sorts?
DTA Gareth
 
Posts: 37
Joined: Thu Feb 18, 2016 4:12 pm
ECU Model: No ECU

Re: vw variant

Postby dannyboy » Tue Nov 15, 2016 2:41 pm

yes much bigger ones for the wall ;) I'm a vw man so making the most out of the motor is a big part of it .the chassis setup is purely for chasing numbers as safely as pos.next year it'll be on the gas with a little motor .then the 650rwhp monster will be unleashed ..when i can raise the funds for the new ecu and other parts to finish it :lol:
but all going well it should run well into the 9s on the small motor.... :?:
dannyboy
 
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: vw variant

Postby Boardpaul » Mon Jan 02, 2017 2:54 pm

Danny,
Are you using DTA on the nitrous motor?
Just looking at setting mine up. Got dirty Nige old engine minus heads.
Boardpaul
 
Posts: 39
Joined: Mon Jan 02, 2017 11:50 am
ECU Model: S40 Pro
Firmware Version: 60

Re: vw variant

Postby dannyboy » Fri Jan 06, 2017 4:09 pm

yes mate i use a wet kit on my motor i don't think the s40 can do a dry system? its a simple setup with a basic progressive controller and a rpm window switch to turn it on at 4k and off at 8.2k works very well although i think you can us ecu as a window switch if setup ? but alex will be able to confirm that info?
dannyboy
 
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: vw variant

Postby Boardpaul » Sat Jan 07, 2017 4:03 pm

I have a wet system already. I just need to move it all into the new ecu.
Currently run it on a full throttle switch but might bring it in more progressively.
Boardpaul
 
Posts: 39
Joined: Mon Jan 02, 2017 11:50 am
ECU Model: S40 Pro
Firmware Version: 60

Re: vw variant

Postby Jon K » Mon Jan 09, 2017 1:13 pm

This project looks awesome - I'll be interested to see how you control the nitrous w/ S40/S80
1992 700RWHP Pump Gas BMW
User avatar
Jon K
 
Posts: 591
Joined: Fri Dec 04, 2009 1:45 am
Location: Pennsylvania, USA
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: vw variant

Postby dannyboy » Tue Jan 10, 2017 5:25 pm

the nitrous controller will only use the ecu to turn on at WOT and above 4k the rest of it is using the nitrous controller in effect the ecu will be a window switch for it and also not trigger it until the 2 step is turned off .
dannyboy
 
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Next

Return to Share Your Project

Who is online

Users browsing this forum: No registered users and 0 guests

cron