S60 pro hayabusa gear position sensor

Wiring best practices and loom building technique
Post Reply
gsxr2mil
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

S60 pro hayabusa gear position sensor

Post by gsxr2mil »

On suzuki hayabusa how would I wire the gear position sensor to pin 3, kinda makes since but I'm a little lost and want to do it rite the first time.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 pro hayabusa gear position sensor

Post by Rob Stevens »

Personally I wouldn't bother with the stock sensor, change it for one of the proper hall effect ones from playskool or geartronics this will give you closed loop gear shifting.
gsxr2mil
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Re: S60 pro hayabusa gear position sensor

Post by gsxr2mil »

Ok thankyou
Post Reply