S60 hayabusa coil and injector wiring
-
- Posts: 46
- Joined: Wed Feb 14, 2018 8:05 am
- ECU Model: S60 Pro
- Distributor: creative custom racing Frank
- Firmware Version: 79.06
S60 hayabusa coil and injector wiring
Hey I have a s60 pro on my hayabusa and coil and injector cylinder 1 and 4 fire at the same time and 2 & 3 fire and vice versal at the same time when they are suppose to. What wire numbers etc do I match them with from the ecu pin #
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60 hayabusa coil and injector wiring
As per instructions. Wire per cylinder in firing order.gsxr2mil wrote:Hey I have a s60 pro on my hayabusa and coil and injector cylinder 1 and 4 fire at the same time and 2 & 3 fire and vice versal at the same time when they are suppose to. What wire numbers etc do I match them with from the ecu pin #
How anything fires will depend on how you're running it and the ecu is setup, wasted spark, or sequential, likewise batch fire or sequential for injection.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S60 hayabusa coil and injector wiring
You will find the info on the diagram. However Busa has an unusual firing order of 1243, not 1342 like most engines, this only really matters if you want to run sequential, but you may as well get it right.
Pin 10 (op1) to Cyl 1
Pin 26 (op4) to Cyl 3
Pin 18 (op2) to Cly 2
Pin 1 (op3) to Cly 4
Also tick twin spark in general engine settings, this allows you to run without a cam sensor.
Use the same thinking for the injectors as you may as well wire them correctly also.
Pin 10 (op1) to Cyl 1
Pin 26 (op4) to Cyl 3
Pin 18 (op2) to Cly 2
Pin 1 (op3) to Cly 4
Also tick twin spark in general engine settings, this allows you to run without a cam sensor.
Use the same thinking for the injectors as you may as well wire them correctly also.