Page 1 of 1

S60 4cylinder wiring

Posted: Mon May 13, 2019 2:28 pm
by gsxr2mil
I have 8 injectors on my gsxr1000 4 cylinder motorcycle 2 injectors per cylinder and both as of now wrk in batch and spray fuel all the same time.
Cylinder 1 & 4 fires together and 2 & 3 fires together, how do or can i wire it so cylinder 1 and 4 and 2 & 3 Injectors at the bottom only work to about 5500rpm then above that rpm the top injectors cut on while the bottom still runs... thanks

Re: S60 4cylinder wiring

Posted: Mon May 13, 2019 4:08 pm
by stevieturbo
Stage them, primaries then secondaries.

Re: S60 4cylinder wiring

Posted: Mon May 13, 2019 4:34 pm
by gsxr2mil
And how may I do that which wire has to be connected to what?

Re: S60 4cylinder wiring

Posted: Tue May 14, 2019 2:50 am
by Alex DTA
Pin 9 - Inj 1 and 4 primary
Pin 17 - Inj 2 and 3 primary
Pin 34 - Inj 1 and 4 secondary
Pin 25 - Inj 2 and 3 secondary