S60 4cylinder wiring

Wiring best practices and loom building technique

S60 4cylinder wiring

Postby gsxr2mil » Mon May 13, 2019 2:28 pm

I have 8 injectors on my gsxr1000 4 cylinder motorcycle 2 injectors per cylinder and both as of now wrk in batch and spray fuel all the same time.
Cylinder 1 & 4 fires together and 2 & 3 fires together, how do or can i wire it so cylinder 1 and 4 and 2 & 3 Injectors at the bottom only work to about 5500rpm then above that rpm the top injectors cut on while the bottom still runs... thanks
gsxr2mil
 
Posts: 33
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Re: S60 4cylinder wiring

Postby stevieturbo » Mon May 13, 2019 4:08 pm

Stage them, primaries then secondaries.
stevieturbo
 
Posts: 3025
Joined: Tue Aug 02, 2011 12:08 pm
Location: Norn Iron
ECU Model: No ECU

Re: S60 4cylinder wiring

Postby gsxr2mil » Mon May 13, 2019 4:34 pm

And how may I do that which wire has to be connected to what?
gsxr2mil
 
Posts: 33
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Re: S60 4cylinder wiring

Postby Alex DTA » Tue May 14, 2019 2:50 am

Pin 9 - Inj 1 and 4 primary
Pin 17 - Inj 2 and 3 primary
Pin 34 - Inj 1 and 4 secondary
Pin 25 - Inj 2 and 3 secondary
Alex DTA
 
Posts: 1295
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79


Return to Wiring and Loom Building

Who is online

Users browsing this forum: No registered users and 1 guest

cron