Traction control settings swap themselves in DTASwin87.03?

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
SMR
Posts: 137
Joined: Tue Jan 16, 2018 9:38 am
ECU Model: S100 Pro
Distributor: DTA
Location: Aberdeen

Traction control settings swap themselves in DTASwin87.03?

Post by SMR »

Hi Guys,
Spotted a strange one this evening whilst playing with the latest 87.03 DTASwin;

In the Traction Control Settings window, the "Max ign cut percentage" figures for wet and dry swap over compared to when using my regular 82.16 DTASwin.

So, in the old version (82.16) I've got 100 for WET and 50 for DRY.
When I open the same map in the new 87.03 version, I've now got 50 for WET and 100 for DRY!

Cheers
Steve
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Traction control settings swap themselves in DTASwin87.0

Post by Alex DTA »

Yup, reproduced, will fix now.

87.03 isn't new anymore, 89 was released last week.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Traction control settings swap themselves in DTASwin87.0

Post by Alex DTA »

This will be in 89.01, out later this week.
SMR
Posts: 137
Joined: Tue Jan 16, 2018 9:38 am
ECU Model: S100 Pro
Distributor: DTA
Location: Aberdeen

Re: Traction control settings swap themselves in DTASwin87.0

Post by SMR »

Good stuff. Thanks Alex.
Post Reply