Lamda control settings

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Lamda control settings

Post by c2turbo »

this should be an easy one I am running dual lamda sensors but I am unable to select the cylinder per sensor, what do or don't I have selected correctly ( this is a flat 6 911 engine)I have
attached a jpg of the setting I am currently using
Attachments
Lamda.jpg
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Lamda control settings

Post by Rob Stevens »

In red on the screen it's indicating that this feature can't be used in batch fire mode.
You will have to add a cam sensor and initiate sequential injection for this to work.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Lamda control settings

Post by stevieturbo »

Yep...annoyingly you must be running full sequential in order to have two lambda sensors connected.

Which means in batch fire, you cannot even use this input for logging.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Lamda control settings

Post by Alex DTA »

stevieturbo wrote:Yep...annoyingly you must be running full sequential in order to have two lambda sensors connected.

Which means in batch fire, you cannot even use this input for logging.

This was changed over a year ago.
Update the firmware, and you can run batch fire and two lambda sensors.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Lamda control settings

Post by Rob Stevens »

Doh, make mental note to update my PC software!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Lamda control settings

Post by stevieturbo »

Rob Stevens wrote:Doh, make mental note to update my PC software!
Or the ecu firmware lol
Post Reply