ive tried it ticking twinspark , still no difference.
Ill measure coilvoltage DURING cranking, I really do have a good battery even on constamt charge and have cleaned main ground . It may be a ground issue anyway but Ill look into that. DTA gets 12V for sure as everything works and no red screen or so.
p8pro no spark issue
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: p8pro no spark issue
Or as I already said...we need exact details of the coils you are using and how they are wired.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: p8pro no spark issue
And check that cop and sequential are off
Re: p8pro no spark issue
ok step further now, settings in the unequal firing angels box were set to yes ("unequal firing" and "one coil per plug"). Ive set them to no and coils now do fire at cranking. engine almost starts for half a second but cutsoff immediatly. Checked sparkplugs, black and dry so next step to check injectors for output. I suspect the old petrol hasnt done any good to them.
Its strange the settings have changed as the mapping has not been altered since. I cant check the old map on disc as I overwrote it
Twinspark mode is still off or do I need to set that as well? I guess im now running wasted spark to have spark always.
Its strange the settings have changed as the mapping has not been altered since. I cant check the old map on disc as I overwrote it
Twinspark mode is still off or do I need to set that as well? I guess im now running wasted spark to have spark always.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: p8pro no spark issue
Yes twin spark on
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: p8pro no spark issue
Again this depends how the coils are wired.Rob Stevens wrote:Yes twin spark on
Someone might have wired a pair of coils in series...or they may not.
As for any changes over time etc....was this ever a running setup in your possession to ensure 100% it did run, and nothing has changed since it last run ?
But dry plugs are at least a good sign it just needs more fuel
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: p8pro no spark issue
Yeh, but why do that when you have 8 ignition drivers, but entirely valid point stevie
Re: p8pro no spark issue
I have managed to get spark on cranking now. The settings one coil per plug and unequal firing in the unequal firing settings window seem to have changed. There were on yes and after changed to no i had spark.
Ticking twinspark makes no difference.
Car made intentions to start but dont get it running.
Have cleaned injectors all fine. Sparkplugs are cheapones very black. Have ordered bosch platinum ones hope these do the final thing to make it run.
How can the settings above changed on the 2 tickboxes by itself? Anybody seen data change spontaneously in p8pro?
Ticking twinspark makes no difference.
Car made intentions to start but dont get it running.
Have cleaned injectors all fine. Sparkplugs are cheapones very black. Have ordered bosch platinum ones hope these do the final thing to make it run.
How can the settings above changed on the 2 tickboxes by itself? Anybody seen data change spontaneously in p8pro?
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: p8pro no spark issue
I've had the injector angle map spontainiusley add a "-" to 50% of the settings. I have also heard of sequential selecting its self, so it can definitely happen
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: p8pro no spark issue
And as I said before....did you personally have this as a good running setup before it was parked up over that time and know 100% it was never touched ?kitcar wrote:I have managed to get spark on cranking now. The settings one coil per plug and unequal firing in the unequal firing settings window seem to have changed. There were on yes and after changed to no i had spark.
Ticking twinspark makes no difference.
Car made intentions to start but dont get it running.
Have cleaned injectors all fine. Sparkplugs are cheapones very black. Have ordered bosch platinum ones hope these do the final thing to make it run.
How can the settings above changed on the 2 tickboxes by itself? Anybody seen data change spontaneously in p8pro?
I'd rarely ever choose Bosch plugs, and cheap NGK or Denso plugs are perfectly fine, and for an engine you're struggling to get running, I'd far sooner use a cheap copper plug than anything you might foul or flood trying to get it running