SR20DE trigger

[Silbeam]

hi has anyone used the AEM trigger disc 24-1 instead of the OE 360 if so was it more reliable at high rpm and how did you set it up ? many thanks

[Silbeam]

heres the 24=1 trigger scope

[Alex DTA]

They work well.
Not sure on the TDC angle with those, but if you post another crank scope with all spark plugs removed except cylinder 1, we can get that sorted.

[Silbeam]

thanks
completely removed or disconnected ?
heres one with them disconnected

[Silbeam]

is it a case of just moving the sensor position in general settings with the timing light on ?

[stevieturbo]

removed obviously, so cyl1 can be identified.

[Alex DTA]

is it a case of just moving the sensor position in general settings with the timing light on ?

If you're close enough that it will run, then that's all you need to do.

If not, then remove the spark plugs from the engine, not just disconnect them.

[Silbeam]

this is one with just number 1 plug still in

[Silbeam]

do I need to use a different trigger mode or still use mode 8 but change the trigger count to 24 and coil teeth to 1 ?

[Silbeam]

one more question can you lock timing anywhere with out changing the map to set up timing ?