Crank signal

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Crank signal

Post by Spryboy1974 »

Hi guys, new to this stuff so any help much appreciated.
I have an s40 pro running on a Renault Megane f7r engine which I need to get up and running. I have borrowed a map off someone on this site for an f4r engine as a base to get me going.
My problem is that the Megane engine uses a 60-2 tooth pattern and the f4r engine is different,so I have changed the numbers in the settings to suit but I am unable to change anything in the ‘map mode’ section and when I do the crank oscilloscope it comes up with a horrible graph,so am thinking it’s because of the Clio f4r map mode??
I am pretty sure the wiring is good??

What do I need to do please?
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Crank signal

Post by stevieturbo »

posting the oscilloscope result would be a start.

or showing us the settings/map you used.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Crank signal

Post by Alex DTA »

Please post a crank scope.
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Re: Crank signal

Post by Spryboy1974 »

Will do as soon as I get a chance thanks guys
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Re: Crank signal

Post by Spryboy1974 »

Got the images but can’t upload as it’s saying they are too big. I’m not computer savvy please help again!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Crank signal

Post by stevieturbo »

surprised the screenshot or saved file would be big at all.

if this forum wont accept them, just use a generic image host site

https://postimages.org/
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Re: Crank signal

Post by Spryboy1974 »

Thanks stevieturbo, I took the pics with my iPad lol!
So I got them in thumbnails but how do I get from that site to here?
Sorry to be so useless with this stuff
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Crank signal

Post by stevieturbo »

upload the photo, and then copy and paste the weblink.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Crank signal

Post by katana »

Or get crank scope image on your screen, press 'Print Screen' button on key board, then open 'MS Paint' and click 'paste' - screen shot will open. Then go to 'File' and click 'save as' - give it a name and save on desktop or in downloads folder. Come back to this thread, add a post and add the saved image then post - job done.
Spryboy1974
Posts: 33
Joined: Fri Aug 03, 2018 10:02 am
ECU Model: S40 Pro

Re: Crank signal

Post by Spryboy1974 »

Thanks guys will give that a go tomorrow hopefully :D
Post Reply