E85 sensor and shift cut switch light

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

E85 sensor and shift cut switch light

Post by c2turbo »

I just finished installing a GM content sensor and now when i open the diag screen the shift cut switch cycles between on and off do i need to change something in the input settings

Thanks Dave
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: E85 sensor and shift cut switch light

Post by Alex DTA »

The diagnostic screen just shows the hardware is working. This will cycle, as the E85 sensor outputs a PWM signal.
You can ignore that.
Post Reply