Analog output

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
cooberpedy
Posts: 21
Joined: Wed Sep 28, 2016 11:42 am
ECU Model: S100 Pro
Firmware Version: 89.00
Location: Germany

Re: Analog output

Post by cooberpedy »

There is no need to have a linear adjustment.
The Corsa EPAS has only 3 maps with no interpolation

max assistance from 0 to 18 mph
mid assistance from 18 to 45 mph
min assistance from 45+ mph

nothing to gain from a linar adjustment rather than having a quantisised adjustment.
Cornel
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Analog output

Post by Mr Drew »

Don't use the aftermarket box. Connect pin 7 on the corsa ecu to the rev counter output on the dta connect pin 6 to the aux (1?) Output on the dta, set it to variable frequency and link it to road speed, if I remember correctly around 300hz is minimum assistance, I don't run the corsa epas anymore so can't be 100% sure.
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Analog output

Post by swsupermoto »

Thanks that's great but I'm using ana 1 so can I use ana 2
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Analog output

Post by Mr Drew »

I can't remember, only one of the auxs let's you use a variable frequency iirc.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Analog output

Post by Alex DTA »

Only Aux 3 can vary frequency.
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Analog output

Post by swsupermoto »

Shame as that would have been great but I'm using it for gear postion. Can that be moved to free up ana3.
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Analog output

Post by Mr Drew »

Aux 3, not ana 3.
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Analog output

Post by swsupermoto »

Yes but aren't they linked.
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Analog output

Post by swsupermoto »

Ok I've just looked and aux 3 can be used independently to ana3.
swsupermoto
Posts: 81
Joined: Fri May 30, 2014 7:36 am
ECU Model: S60 Pro
Distributor: mosley rolling road
Firmware Version: 66

Re: Analog output

Post by swsupermoto »

Here's a good link I've found also. There a ref to dta from a member sparrow not sure if he's on here.
http://www.clubgti.com/showthread.php?2 ... py-with-it
Post Reply