Hi, I'm about to get my Buell started up but not sure that I got everything right? I'm using the standard Bosch magnetic sensor on the crank and added an extra sensor of the same type on the front exhaust cam. See crank oscilloscope picture below if it looks to be OK?
Thanks Peter
Crank & cam sensor Buell 1125
-
- Posts: 33
- Joined: Thu Nov 12, 2015 8:53 am
- ECU Model: S60 Pro
- Firmware Version: 79.02
Re: Crank & cam sensor Buell 1125
yeah the scope is just so you know where to set your sensor position
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Crank & cam sensor Buell 1125
Crank signal looks fine, but cam doesn't, you are getting multiple hits.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Crank & cam sensor Buell 1125
The cam signal isn't right, you can't use that at the moment.
Start it in grouped mode, get it running, then take a scope with it running to see if it's any better.
Start it in grouped mode, get it running, then take a scope with it running to see if it's any better.
-
- Posts: 33
- Joined: Thu Nov 12, 2015 8:53 am
- ECU Model: S60 Pro
- Firmware Version: 79.02
Re: Crank & cam sensor Buell 1125
Thanks for the answers. Alex, what's grouped mode?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Crank & cam sensor Buell 1125
Wasted spark and grouped injection.
Although you can ignore that, it's completely irrelevant to you, as you have a single cylinder engine.
Just make sure sequential injection is off, and one coil per plug is off.
Why have you installed a cam sensor?
Although you can ignore that, it's completely irrelevant to you, as you have a single cylinder engine.
Just make sure sequential injection is off, and one coil per plug is off.
Why have you installed a cam sensor?
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Crank & cam sensor Buell 1125
A google suggests the 1125 is a V twin ?
And given how many hits....are you sure it is a cam sensor that wire is connected to ? Any pics or details ?
Is this same engine ?
And given how many hits....are you sure it is a cam sensor that wire is connected to ? Any pics or details ?
Is this same engine ?
-
- Posts: 33
- Joined: Thu Nov 12, 2015 8:53 am
- ECU Model: S60 Pro
- Firmware Version: 79.02
Re: Crank & cam sensor Buell 1125
Yes, it is a 72 degree v-twin engine with odd fire.
-
- Posts: 33
- Joined: Thu Nov 12, 2015 8:53 am
- ECU Model: S60 Pro
- Firmware Version: 79.02
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Crank & cam sensor Buell 1125
That's what happens when I post on a Sunday afternoon.
So the cam sensor is for the odd fire pattern.
What is the cam sensor picking up off? Have you used proper shielded cable for it?
So the cam sensor is for the odd fire pattern.
What is the cam sensor picking up off? Have you used proper shielded cable for it?