Hi
I've got an engine that needs an ISCV. The pipe leading to it when fully blocked to fully open gives me a range of +/-300RPM.
I need a 2 port, 2 pin ISCV that is fully sealed at 100%. Any ideas?
Could possibly use a 3 wire model if needed...
Idle Speed Control Valve
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Idle Speed Control Valve
big old Bosch 2wire one? (I forget part number haven't used one in over a decade haha) I'd just use ignition timing, but assume there's a reason you aren't keen.
update: found an image with part number
update: found an image with part number
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Idle Speed Control Valve
I have one in stock, but make sure you're sitting down if you want a price.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Idle Speed Control Valve
Many valves like the above second hand on egay etc. ( this seems new )...can't comment if they're fully open or closed though
eg
https://www.ebay.co.uk/itm/255513094690 ... SwFxJibCY-
eg
https://www.ebay.co.uk/itm/255513094690 ... SwFxJibCY-