Idle valve

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Playmo90
Posts: 12
Joined: Tue May 12, 2020 10:10 am
ECU Model: S60 Pro
Distributor: LORRTEC
Firmware Version: 89.00

Idle valve

Post by Playmo90 »

Hello,

Is it possible to control a Magneti Marelli 4 Pin valve with S60 ?
If yes, how ?

Thanks
Alex DTA
Posts: 1491
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Idle valve

Post by Alex DTA »

Do you know what type it is?

4 wire usually means stepper motor, which the S60 can't control.
Playmo90
Posts: 12
Joined: Tue May 12, 2020 10:10 am
ECU Model: S60 Pro
Distributor: LORRTEC
Firmware Version: 89.00

Re: Idle valve

Post by Playmo90 »

Yes exactly it's stepper motor. Thanks for your feedback.
Can you share some valve compatible?
Alex DTA
Posts: 1491
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Idle valve

Post by Alex DTA »

Any two wire idle valve will work.
We sell a genuine Bosch valve, but they are £200 + VAT.
Post Reply