S60Pro not connecting to laptop

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

S60Pro not connecting to laptop

Post by VWBug »

Hi,

I ran my engine today (car is still not done).

Turned the power back on, and ECU refuses to connect to laptop. Either the port is already in use, or the ECU is not connected or power is not turned on.


ECU been working flawlessly for years. Can’t understand if I did any changes.

Any ideas?

Thanks!

Erlend
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60Pro not connecting to laptop

Post by stevieturbo »

So the ecu is still alive and engine runs ?

Are you using the same laptop you always have ?

Are you using the same lead ?

Is the port configured correctly both in DTA software and the ecu's USB-Serial converters ?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60Pro not connecting to laptop

Post by Rob Stevens »

Yes, find out in windows what com port the PC is using to connect the USB serial adaptor, then select that same com port in the dta software
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

Re: S60Pro not connecting to laptop

Post by VWBug »

Thanks for the replies.

No, the engine will not start, or connect to the computer.

Same computer with RS232 port
Same cable RS232
Tried swapping com ports, both on computer and software.

Error codes are either “Port already in use” “ECU not connected”
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S60Pro not connecting to laptop

Post by Alex DTA »

When you turn on the ECU, does the fuel pump prime?
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

Re: S60Pro not connecting to laptop

Post by VWBug »

Fuel pump is on a separate switch..
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

Re: S60Pro not connecting to laptop

Post by VWBug »

Tried again now.

12V to pin 31 verified
COM1 on both computer and software.

Nothing on the opening screen.

Opened Work offline, then connect to ECU;

Attempting to connect to ECU - FAILED!
ECU not Connected or Not Switched On!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60Pro not connecting to laptop

Post by stevieturbo »

VWBug wrote: Thu Jun 16, 2022 10:29 am Fuel pump is on a separate switch..
Why ?

Hook up a test light to the fuel pump trigger from the ecu. This will at least give some indication if the ecu is alive when you power on.

You confirm power to pin 31 ( on the power plug hopefully ).
Can you also confirm ground on the relevant pin too ? 13/14
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

Re: S60Pro not connecting to laptop

Post by VWBug »

stevieturbo wrote: Thu Jun 16, 2022 12:13 pm
VWBug wrote: Thu Jun 16, 2022 10:29 am Fuel pump is on a separate switch..
Why ?

Hook up a test light to the fuel pump trigger from the ecu. This will at least give some indication if the ecu is alive when you power on.

You confirm power to pin 31 ( on the power plug hopefully ).
Can you also confirm ground on the relevant pin too ? 13/14
It’s just easier when drag racing, reading logs etc.

Will the fuel pump trigger pin give me a 12V reading regardless of settings loaded into the ECU? Pin 3 right?

Yes, switched 12V and ground to the power plug
VWBug
Posts: 17
Joined: Thu May 26, 2022 4:07 pm
ECU Model: S60 Pro

Re: S60Pro not connecting to laptop

Post by VWBug »

Tested fuel prime. No power on pin 3 at startup
Post Reply