s80 pro Aux 7,8 and 9 cant access

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
maxiice
Posts: 67
Joined: Sat Apr 13, 2013 5:16 pm
ECU Model: S80 Pro
Firmware Version: 63

s80 pro Aux 7,8 and 9 cant access

Post by maxiice »

Hi what can be the issue?
Everything else in the drop down menu can be accessed but Aux 7,8 ang is kinda gray letters, not black.


Thanks
Geir
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: s80 pro Aux 7,8 and 9 cant access

Post by Alex DTA »

Your firmware is too old. You need to update it.
maxiice
Posts: 67
Joined: Sat Apr 13, 2013 5:16 pm
ECU Model: S80 Pro
Firmware Version: 63

Re: s80 pro Aux 7,8 and 9 cant access

Post by maxiice »

Oki thanks,
So this means getting a firmwarecable from DTA ?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: s80 pro Aux 7,8 and 9 cant access

Post by Rob Stevens »

You can add a switch to your own cable, the pins are identified in the s series wiring diagrams. Or buy one from DTA.
maxiice
Posts: 67
Joined: Sat Apr 13, 2013 5:16 pm
ECU Model: S80 Pro
Firmware Version: 63

Re: s80 pro Aux 7,8 and 9 cant access

Post by maxiice »

Oki, thanks will do so :)
Post Reply