New ECU Series

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: New ECU Series

Post by Alex DTA »

Yes
bart
Posts: 4
Joined: Thu Mar 17, 2022 6:04 pm
ECU Model: No ECU

Re: New ECU Series

Post by bart »

I got the T2 to run on the slk230 compressor. But I keep experiencing loss of USB connection with the ecu.
sometimes It works for a couple of minutes, sometimes it allready disconnects after several seconds after engine start.
Anybody have the same experience? or advice how to improve. very difficult to tune the car if it keeps disconnecting
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: New ECU Series

Post by Alex DTA »

bart wrote: Sat Apr 09, 2022 11:25 am I got the T2 to run on the slk230 compressor. But I keep experiencing loss of USB connection with the ecu.
sometimes It works for a couple of minutes, sometimes it allready disconnects after several seconds after engine start.
Anybody have the same experience? or advice how to improve. very difficult to tune the car if it keeps disconnecting
Please email office@dtafast.co.uk for help.
jass161
Posts: 3
Joined: Sun Feb 04, 2018 4:16 pm
ECU Model: S60 Pro
Firmware Version: 79.02

Re: New ECU Series

Post by jass161 »

Hi. Im new user of t4 ecu( before we used s60pro on another car and that was brilliant ecu whit good software). When you release new version of t-series pc software. Problem is: ecu have no logging option!?
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: New ECU Series

Post by katana »

jass161 wrote: Tue Apr 26, 2022 1:55 pm Hi. Im new user of t4 ecu( before we used s60pro on another car and that was brilliant ecu whit good software). When you release new version of t-series pc software. Problem is: ecu have no logging option!?
I'd find that surprising - bit retrograde step if correct! :?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: New ECU Series

Post by Alex DTA »

Logging was not ready at release. It is now.
Email office@dtafast.co.uk and we'll send the latest software and firmware.
There will be a release to the website soon.

There is a lot more logging available. Up to 32 MB, 126 items at up to 200 Hz continuous logging.
There will be burst options up to 1Khz later, but that's not a priority now.
jass161
Posts: 3
Joined: Sun Feb 04, 2018 4:16 pm
ECU Model: S60 Pro
Firmware Version: 79.02

Re: New ECU Series

Post by jass161 »

Alex DTA wrote: Wed Apr 27, 2022 2:20 am Logging was not ready at release. It is now.
Email office@dtafast.co.uk and we'll send the latest software and firmware.
There will be a release to the website soon.

There is a lot more logging available. Up to 32 MB, 126 items at up to 200 Hz continuous logging.
There will be burst options up to 1Khz later, but that's not a priority now.
Hello. Email sent!
bart
Posts: 4
Joined: Thu Mar 17, 2022 6:04 pm
ECU Model: No ECU

Re: New ECU Series

Post by bart »

I noticed that there is a new firmware for the T-series.
version 2.13 however which PC-software works with this Firmware?
Post Reply