Aux output help

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Aux output help

Post by Rob Stevens »

No, the S60 uses 2 connectors, however they are the same style and you should be able to just re pin into the new connectors, that shouldn't be an issue as you probably want to mod the loom to add the extra wires to use the S60 features.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Aux output help

Post by Alex DTA »

Not plug and play, no, as the S60 has two connectors.
If you have enough slack in the loom, you can just re pin it though.
Post Reply