Pico IWP042 injectors Clio 182

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Jonnyt80
Posts: 11
Joined: Thu Jul 13, 2017 5:04 pm
ECU Model: S60 Pro
Location: Perth

Pico IWP042 injectors Clio 182

Post by Jonnyt80 »

does anyone have any technical data mainly battery compensation times for Pico IWP042 injectors from a 182 clio. i, sure they are either 240cc or 250cc but cant seem to fine any data sheets online
thanks
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: Pico IWP042 injectors Clio 182

Post by iceman_n »

why dont you use the "injector dead time" tool from the DTA software, at least for a start
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Pico IWP042 injectors Clio 182

Post by stevieturbo »

Or just use zero...it really isnt that critical. It was zero for years when ecu's never offered such a feature and there were no problems

Either way...easy options out there
JON-TEC-RALLYE
Posts: 37
Joined: Sat Jul 30, 2011 4:35 pm
ECU Model: S100 Pro
Distributor: JON-TEC-RALLYE
Firmware Version: 89
Location: Canary-Island

Re: Pico IWP042 injectors Clio 182

Post by JON-TEC-RALLYE »

good morning, with 0.7 msec it would be ok to start, the injector size is very fair of flow for any power improvement,
better use iwp043 330cc also 0.7msec
DTA--MoTec--Link--Ecumaster--HONDATA
Jonnyt80
Posts: 11
Joined: Thu Jul 13, 2017 5:04 pm
ECU Model: S60 Pro
Location: Perth

Re: Pico IWP042 injectors Clio 182

Post by Jonnyt80 »

thanks all for replying
the car was running but it was to change the fuel equation in the ecu (non DTA) for someone which requires injector data for the calculation
Post Reply