Hi
Just downloded the latest software to DTA S80 and discover a new feature in General settings two.
"Pulse injectors on switch on"
I guess this setting activates the injectors for the time set in General engine settings when you power up the ecu.
But is the injector start pulse setting still active, when you turn starter motor?
So I will get double dose of fuel?
Edit: Can I use the new software 90.20 with my old firmware 66.01 ?
Edit: No, did not work. Firmware something around 70.00 was needed.
/Björn
Pulse injectors on switch on
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Pulse injectors on switch on
Hi Bjorn
Correct, this feature allows the injectors to be pulsed when the ECU turns on. This is in addition to the pulse when the engine starts turning.
Correct, this feature allows the injectors to be pulsed when the ECU turns on. This is in addition to the pulse when the engine starts turning.