S60 pro hayabusa not firing

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
gsxr2mil
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

S60 pro hayabusa not firing

Post by gsxr2mil »

I have a suzuki hayabusa and when I go to fire the bike up it doesn't fire at the coils but when I do a coil test etc it'll fire, any thoughts on this??
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 pro hayabusa not firing

Post by stevieturbo »

Has it ever run ?

Crank scope ?
jsauto
Posts: 17
Joined: Mon Nov 20, 2017 11:26 am
ECU Model: S80 Pro
Firmware Version: 73.10

Re: S60 pro hayabusa not firing

Post by jsauto »

what crank wheel do you have there are 24-1 and 24 -2
the trikker is on 102 degree
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 pro hayabusa not firing

Post by Rob Stevens »

And there was an 8+1 !
Post Reply