Get the engine warm, then open Real Time Mapping. Run the engine.
That will show if there are any compensations being applied
engine that starts when he wants
-
- Posts: 20
- Joined: Wed Aug 28, 2019 5:29 pm
- ECU Model: S60 Pro
- Distributor: Xap
- Firmware Version: 86.02
Re: engine that starts when he wants
I hope I show the right thing
on the first picture is when my engine runs well
on the second picture it's after the engine is cut, he does not want to start anymore
the third image is when it does not work well, in degrade mode thanks for help
on the first picture is when my engine runs well
on the second picture it's after the engine is cut, he does not want to start anymore
the third image is when it does not work well, in degrade mode thanks for help
Re: engine that starts when he wants
It looks to me like the air temperature compensation is your problem. At 18degC it's showing +1% fuel at 22degC it's showing -100%
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: engine that starts when he wants
As Mr Drew says, that looks wrong.
Post a picture of your Air Temp compensations.
Post a picture of your Air Temp compensations.
-
- Posts: 20
- Joined: Wed Aug 28, 2019 5:29 pm
- ECU Model: S60 Pro
- Distributor: Xap
- Firmware Version: 86.02
Re: engine that starts when he wants
you have seen right
here is my air temp compensation the -256 at 25 degrees seemed inappropriate, I do not know how he got there
so I replace it with -2 it seems to work, I'm not cut anymore
it no longer works in degraded mode
Thank you for your help, you got me out of trouble
I would never have found without you
here is my air temp compensation the -256 at 25 degrees seemed inappropriate, I do not know how he got there
so I replace it with -2 it seems to work, I'm not cut anymore
it no longer works in degraded mode
Thank you for your help, you got me out of trouble
I would never have found without you