To say I’m peaved is an under statement I spent years waiting for the thing to turn up then to go set it up for the first time and the thing goes tits up because of a firmware issue,
We have followed the DfuSedemo to reset itself only to have the bloody thing keep dropping out before it’s finished every time !!!
My laptop is a fairly quick PC as it copes with any video and codecs for video CCTV decoding etc, so do I Throw the dash in the bin and take it on the chin and buy the Ecumaster dash
As I feel I have wasted my money
Rant over
NT Dash woes
Re: NT Dash woes
And we have just tried a new laptop still the same stops around 91%
-
- Posts: 58
- Joined: Sun May 27, 2018 3:28 pm
- ECU Model: S80 Pro
- Distributor: DTA Direct
- Firmware Version: 73.01
- Location: Berkshire
Re: NT Dash woes
i feel another road trip may be on the cards! or pop it in the post!!! i know @ dta will be sympathetic as it has just sat in its box for the last year!!! this is why my gearbox was put in asap and used!!!
Re: NT Dash woes
It was when the laptop was connected it went tits up sat there fine on its own on the default screen
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: NT Dash woes
Paul
As I said on the phone last night, send it back and we'll update it for free.
I can't do much more than that.
Alex
As I said on the phone last night, send it back and we'll update it for free.
I can't do much more than that.
Alex
Re: NT Dash woes
Alex, when trying to enter values for the sensor calibration I can only type in the number 6, but can paste in any value I want - what am I doing wrong?
For a Bosch water temperature sensor - do you know the calibration input values as I can’t get it do anything sensible?
For a Bosch water temperature sensor - do you know the calibration input values as I can’t get it do anything sensible?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: NT Dash woes
Caps lock needs to be on for UK keyboards. I wish they would fix this.
A thermistor will require a pull up to 5v, so make sure the pull up is turned on. It's 1.5k.
Send me an email and I can send a spreadsheet over that you can use to get the correct values.
A thermistor will require a pull up to 5v, so make sure the pull up is turned on. It's 1.5k.
Send me an email and I can send a spreadsheet over that you can use to get the correct values.