E48

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
DCVR1
Posts: 9
Joined: Sat Mar 14, 2020 7:07 am
ECU Model: P8 Pro
Distributor: dta
Firmware Version: 73.01

E48

Post by DCVR1 »

Hi
Can anybody help please i have a E48 on a fiat twin cam 2ltr with 40s jenvey throttle bodies on essential engine settings what should i put in for these
1/injector dead time
2/the offset
3/switch injector
I have done all others and set timing
Hope someone can help
Cheers Dave
Rob Stevens
Posts: 1163
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: E48

Post by Rob Stevens »

1/injector dead time 0.7 will do unless you have data on your injectors
2/the offset 0.0 only applicable if you have twin spark plugs
3/switch injector NA , only applicable if you are using 2 injectors per cylinder, make sure you have 1 injector selected
Rob
DCVR1
Posts: 9
Joined: Sat Mar 14, 2020 7:07 am
ECU Model: P8 Pro
Distributor: dta
Firmware Version: 73.01

Re: E48

Post by DCVR1 »

Thank you Rob will try it today
Dave
DCVR1
Posts: 9
Joined: Sat Mar 14, 2020 7:07 am
ECU Model: P8 Pro
Distributor: dta
Firmware Version: 73.01

Re: E48

Post by DCVR1 »

Hi
Is there a base map (Fuel/Ignition)i can load into ECU just to run engine before goes to rolling road
I have a map in ecu at present but no idea if right.I have the map on laptop so can take photos of maps and send by whats app if anybody got the time
My Mobile 07473953979
Rob Stevens
Posts: 1163
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: E48

Post by Rob Stevens »

Hi
The 1800 VW map that is in the software should be a good start, just make sure you get the crank trigger type correct and the position BTDC right as you can
DCVR1
Posts: 9
Joined: Sat Mar 14, 2020 7:07 am
ECU Model: P8 Pro
Distributor: dta
Firmware Version: 73.01

Re: E48

Post by DCVR1 »

Hi Rob
Thank you so much for your help where can i down load the vw map
Cheers Dave
Rob Stevens
Posts: 1163
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: E48

Post by Rob Stevens »

it is already in the DTAwin software that you must be using to connect to the ecu. Try it off line File>Open>1800VW>Open
DCVR1
Posts: 9
Joined: Sat Mar 14, 2020 7:07 am
ECU Model: P8 Pro
Distributor: dta
Firmware Version: 73.01

Re: E48

Post by DCVR1 »

Thank you Rob
Engine running will get booked in at rolling road
Cheers again Dave ;) ;)
Rob Stevens
Posts: 1163
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: E48

Post by Rob Stevens »

;)
Nice one
Post Reply