Map For S60 TU5JP4 NFU

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Farzin
Posts: 2
Joined: Thu Jan 17, 2019 2:39 am
ECU Model: S60 Pro
Firmware Version: 73

Map For S60 TU5JP4 NFU

Post by Farzin »

Need a map to get my TU5JP4 NFU started

Peugeot 205
Weight : 830 KG
Compression ratio : 190 PSI
Port Polish Head
Cat Cam 1322705
Lift : 10
Duration : 256
Exhaust Manifolds After Marked 4-2-1
throttle Standard port and polish Size 60mm
air intake : simota racing
Map Sensor : GM 3 Bar
WideBande : AFR 10-20
ATM : 1Bar
And Table Use Map As Load

And Need help in installing a four-wire IDLE Valve

TNX
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Map For S60 TU5JP4 NFU

Post by Alex DTA »

This should get you started. Just check the MAP scaling is correct.
Attachments
TU5 start up.map
(44.48 KiB) Downloaded 234 times
Farzin
Posts: 2
Joined: Thu Jan 17, 2019 2:39 am
ECU Model: S60 Pro
Firmware Version: 73

Re: Map For S60 TU5JP4 NFU

Post by Farzin »

Thankful .
I will check.
The size of the injectors is 196 cc.
Post Reply