MBE 9a4 Launch control problem

This is a place for anything you feel like sharing - car builds, videos, websites, and any off-topic content in general
Post Reply
sogaard
Posts: 8
Joined: Thu May 11, 2017 7:59 am
ECU Model: S60 Pro

MBE 9a4 Launch control problem

Post by sogaard »

Hi
yes I know well that questions are about MBE ecu, hoping if anyone in the forum has knowledge of mbe 9a4
my problem is concerning launch control . when engine is started i cannot enable lc but when there is ignition on the car without the engine started, I can activate LC and indicator light in the display lights and start engine with clutch down, so lc works without problem,
have tried to contact mbe but there is not much help to get there,
SMR
Posts: 119
Joined: Tue Jan 16, 2018 9:38 am
ECU Model: S100 Pro
Distributor: DTA
Location: Aberdeen

Re: MBE 9a4 Launch control problem

Post by SMR »

Hi,
So, with engine running, and clutch down (And gear engaged), it won't enable launch when you press the button? If that's the case, it does sound like there's somehting wrong.
Post Reply